Built Right Pool Heater Manual⁚ An Overview
This manual serves as a comprehensive guide for your Built Right pool heat pump, encompassing installation, operation, maintenance, and troubleshooting. It covers various XW models (BR80XW, BR100XW, BR115XW, BR135XW) along with S7 models. The manual provides step-by-step instructions for optimal performance and longevity of your unit.
Built Right pool heaters are meticulously designed and manufactured, emphasizing quality and reliability. These heaters are the product of an experienced pool heat pump engineer and skilled technicians, ensuring a high standard of performance. The company prioritizes using only superior components with proven track records. Built Right pool heaters source all materials from American suppliers, supporting local industry and ensuring consistent quality. This commitment to quality and local sourcing makes Built Right a trusted name in pool heating solutions. The heaters boast a robust construction, including titanium heat exchangers and non-corrosive plastic cabinets, ideal for diverse climates. The company’s dedication to customer service is evident, with readily available support. They strive to provide efficient and dependable heating solutions, making pool ownership a more enjoyable experience. Built Right heaters are engineered to deliver consistent and reliable pool heating, enhancing your swimming experience. They are known for their ease of operation and user-friendly interfaces. The focus on local manufacturing and customer support sets them apart.
Available Built Right Models (BR80XW, BR100XW, BR115XW, BR135XW)
Built Right offers a range of pool heater models to suit various pool sizes and heating requirements. The BR80XW model is designed for smaller pools, providing efficient heating with a compact footprint. The BR100XW caters to mid-sized pools, offering a balance of performance and energy efficiency. For larger residential pools, the BR115XW provides increased heating capacity. The BR135XW is the most powerful model in this series, designed for very large pools or those requiring rapid heating. These models, identified by the ‘XW’ designation, are engineered for consistent performance and durability. Each model utilizes titanium heat exchangers and durable plastic cabinets, ensuring long-lasting operation in various environmental conditions. The models share a common design philosophy, focusing on user-friendliness and reliability. These models are readily recommended by pool suppliers, affirming their quality. Understanding the differences between these models is crucial for selecting the right heater for your pool. The specific heating capacities of each model ensure you can find a perfect match.
Installation Guidelines
Proper installation is paramount to ensuring the efficient and safe operation of your Built Right pool heater. The heater should be positioned no more than 6 feet below the pool water surface or 15 feet above the pool level. Ensure the selected location provides adequate space for proper airflow and access for maintenance. It’s crucial to adhere to all local building codes and regulations during installation. The unit must be installed on a level, stable surface to prevent damage and ensure optimal performance. Electrical connections should be made by a qualified professional, following all safety guidelines. The heater should be connected to the pool’s plumbing system using appropriate fittings, ensuring no leaks are present. Before operating the heater, verify all connections are secure and properly sealed. Incorrect installation can lead to performance issues, damage to the unit, and void the warranty. It is highly recommended to consult the detailed installation instructions included in the manual and seek professional help if needed. The installation process should follow the manual closely, paying attention to the suggested clearances and plumbing diagrams provided. This careful process ensures that the heater is installed correctly and will operate at peak performance and provide many years of trouble-free operation.
Basic Operation Instructions
Operating your Built Right pool heater is straightforward once properly installed. To begin, ensure the power is supplied to the unit via the breaker or disconnect switch. The control panel will illuminate, displaying the current settings. Use the up and down arrow buttons to set your desired pool temperature. The heater will automatically maintain this temperature. The pool or spa lights on the display will illuminate, indicating that the heater is active. The unit will enter a standby mode if no buttons are pressed for one hour. If the water temperature drops below the set point, the heater will automatically begin heating. To switch between pool and spa modes, follow the specific instructions in the manual. It is important to check the water flow regularly to ensure proper operation. The heater displays “OFF” when no heating is required. Familiarize yourself with the control panel and its settings for optimal use. Avoid making drastic temperature changes as it may affect performance. Always refer to the manual for model-specific operating instructions. The heater is designed with user-friendliness in mind, making it easy to manage your pool’s temperature. Regular monitoring of the display will help you keep track of the heater’s status.
Troubleshooting Common Issues
If your Built Right pool heater isn’t functioning as expected, several common issues might be the cause. Start by checking the power supply, ensuring the breaker is on and the disconnect switch is engaged. If the unit displays “flow check”, inspect water flow to the heater; make sure your pump is operating at sufficient speed. A dirty filter can also impede performance, so clean or replace it. Also make sure the water valves are properly adjusted. If the heater is running but not heating, verify that your thermostat is set to the desired temperature. If the issue persists, investigate for water leaks, especially if water is collecting near the unit. Condensation is normal, up to three gallons per hour, but chlorine presence indicates a leak. In such cases, shut down the heater and contact a qualified technician. If the heater reads “OFF” when any button is pressed, this could indicate a different issue that needs closer attention. Other issues could be low or restricted water flow. Always refer to the manual for specific troubleshooting steps. Remember that simple fixes often resolve issues. Do not attempt repairs beyond your expertise; contact the factory for service when necessary.
Power and Electrical Checks
Ensuring proper power supply is crucial for the reliable operation of your Built Right pool heater. Begin by verifying that the circuit breaker or disconnect switch located near the heat pump is in the “ON” position. Next, check the main electrical panel to confirm that the breaker feeding power to the disconnect or sub-panel by your pool equipment is also on. A tripped breaker can immediately shut down the heater. If your unit still fails to power on, a deeper electrical problem could be the culprit. It’s important to note that a faulty safety switch can also disrupt electrical flow, so it may be necessary to inspect that. Never attempt any electrical repairs yourself if you lack the required experience and training. Always engage a certified electrician for these checks. Additionally, inspect all visible wiring connections for any damage or looseness. If you notice any abnormalities, it’s crucial to address them quickly. Prioritize safety and follow all applicable electrical codes. Consistent proper power delivery is essential for maintaining your heater’s efficiency and performance. Never introduce water into the electrical components.
Flow Check and Water Issues
Proper water flow is paramount for the efficient functioning of your Built Right pool heater. If the heater displays a “flow check” error, start by inspecting the water valves to ensure they are correctly adjusted. Insufficient water flow can prevent the heater from operating, or cause it to shut down. Make sure the pool pump is running and is at a sufficient speed to facilitate adequate water flow. If you have a variable speed pump, the speed may need to be increased for proper heating. Clogged or dirty filters can also impede water flow; therefore, cleaning or replacing them is often necessary. Another common issue arises from condensation. The heater can produce up to three gallons of water per hour through condensation from the evaporator coil. This is normal. However, if water is running out of the bottom of the heater, it could indicate an internal leak. To verify if the water is condensation or pool water, use a chlorine test strip. Condensation will not contain chlorine; if it tests positive, it signifies a leak, necessitating a call to the factory for service.
Filter and Pump Maintenance
Regular maintenance of your pool’s filter and pump is crucial for the optimal performance of your Built Right pool heater. A clogged or dirty filter restricts water flow, which can hinder the heater’s ability to function efficiently. Inspect your filter regularly and clean or replace it as needed, according to the manufacturer’s guidelines. Similarly, ensure your pool pump is operating effectively. Inspect it for any clogs or debris that might impede its performance. The pump should be moving water at the correct rate for the heater to function properly. Maintaining adequate water flow is essential for the heat exchange process, and a poorly maintained pump can significantly impact heating efficiency. Regularly cleaning the pump basket and impeller can prevent flow restrictions. Additionally, check all connections and seals to prevent leaks or air suction, both of which can affect the overall performance of your pool system, including the heater. Remember to always shut off power before performing maintenance on your filter or pump.
Turning the Heater On and Off
To turn your Built Right pool heater on, begin by ensuring that the power supply to the unit is active and the breaker is in the ‘ON’ position. Once power is confirmed, press and release the “set” button four times until the display shows “Off.” Next, press the down arrow twice, at which point “No” should appear on the display; the heater is now on. The pool or spa lights will illuminate next to the display indicating the unit is active. To turn the heater off, repeat the process of pressing the “set” button four times until “Off” appears. Then, press the up arrow twice, and the display should show “Yes” confirming that the heater is off; When the heater is off, the pool and spa lights will not be illuminated. Always verify the display confirms the desired status, and never assume the heater is on or off based on external indicators only. It’s always best to consult your specific model’s manual for detailed instructions.
Service and Support Information
Built Right pool heaters are supported by a dedicated team of experienced professionals, including pool heat pump engineers and technicians. If you encounter any issues with your heater that cannot be resolved using the troubleshooting section of this manual, contacting the factory directly is recommended. Built Right prides itself on providing accessible support, with real people available to answer your calls and address your concerns. Before contacting support, be prepared to provide your heater model number and a detailed description of the issue. For any service needs, it is essential to shut down the pool heater and pump before further action. If there is any standing water around the unit, test for the presence of chlorine using a test strip. Condensation will show no chlorine; if chlorine is present, it indicates a leak. In such cases, shut down the equipment immediately and contact the factory to schedule service. Built Right also ensures that all parts are sourced from American suppliers and that the heaters are built with Titanium heat exchangers and plastic cabinets for durability.